Introducing the JBS Custom Calibrated VVT Attack software for the 3.2l FSi Engine, for those who desire a great Performance Increase, both with and without the need of Additional Purchases or modifications, we have delivered the best option available.
The complete recalibration of the R32 / 4Motion factory VVT bring performance gains previously never thought possible.
The precise calculations needed for the calibration of the inlet and exhaust cams, along with the custom cylinder filling and torque maps make this a totally custom application.
The most noticeable aspects of the Custom-Calibrations VVT Attack software is the increase in low down torque, this is uncharacteristically maintained though out the rev range. With gains of 30 ft/lb torque being seen on the JBS/C-C development car (Mk4 Golf R32).
But that's not all, the improved thermal efficiency and ability to run and maintain an optimized ignition angle can give gains of 35-30 BHP.
Features:
- Improved thermal efficiency means your engine runs cooler and with less EGT this can result in prolonged engine and component life and improved fuel economy.
- A Substantially smoother running engine both at idle and when on load.
- The engine is now much more willing to rev , giving the feeling of a larger cubic capacity engine.
- No flat spots or drop in torque, smooth power delivery all the way to the rev limit.
- The improved exhaust cam calibration now allows the engine to expel the exhaust gasses much more efficiently, this give a much deeper and sportier sound to the exhaust note.
As with all of our bespoke mapping Sessions and unlike many other companies, you will be provided with a before and after Dyno Test Report, certifying the precise performance increase and specifying the conditions under which the test report was developed.
Now available with the option of 'Crackle over run'
|
Stage of Tune
|
Power | Torque | ||
| Bhp | Ps | Ftlb | Nm | |
| Stock Quoted by VAG | 247 | 250 | 236 | 320 |
| Stock Measured | 250 | 253 | 250 | 339 |
| Stage 1 (95 RON) | 265 | 268 | 270 | 366 |
| Stage 1 (99 RON) | 275 | 278 | 285 | 386 |
Please Note: Due to the nature of the DSG boxes used on this particular platform, it is required that the gearbox be calibrated at the same time as the engine. As such an additional discount is offered when purchased as a pair, which is applied upon selecting DSG from the gearbox option below.
Approximate Install Time: 2.0-3.0 hours
A member of the JBS team will be in touch to arrange an install date upon completion of the purchase.
